Traveling is a great way to spend time, but it can also be costly if you have to fly and pay for hotels. One way to avoid that is to drive, and tow a travel trailer with you to stay in. Seeing the country this way means you get to do things at your own pace, and it makes things so much more affordable. But you do have to make sure you know how to stabilize a parked travel trailer to keep you and your travel companions safer.
Stabilizing the trailer is actually not a must, but it is a good idea to do it. If you do not and something breaks or slips, then you could have a minor or even a major disaster on your hands. It also makes being inside the RV much more pleasant, as there will be little to no rocking or instability.
Trailers come in a wide variety of sizes, and the larger ones tend to be much more stable overall, all on their own. The smaller ones are less stable, so if you are using one of those, then you definitely want to get stabilization tools before you start traveling. Thankfully, they are not very big or cumbersome to carry or store.
Before you can stabilize anything, you must park, and that means finding a good spot. If you can find a concrete pad, that would be best, since it will not sink. Campgrounds or RV parks are excellent places to find these kinds of stable pads, and they have water and sewage hookups to boot. However, anyplace that is relatively solid ground can work. Try to avoid muddy areas, as the trailer can sink too easily this way.
The most important tool in your stabilization arsenal is jacks. These are easy to find in any auto parts or big box superstore, and most have them in stock and ready to go. They are also usually very affordable.
Blocks are another way to go. Most people use 2x6 blocks that are anywhere from six to eight inches in length. The length of these blocks, which are usually made of wood, largely depends upon the size of the trailer you are trying to stabilize.
If you really want to go for the utmost in stabilization, think about using both jacks and blocks. They are great for any surface, but you should especially use them if you decide to park in a rainy area or where the ground is soft.
As technology surrounding plastic increases, manufacturers can make plastic blocks that are just as strong and steady as wood ones, but more compact and lightweight. Consider using these instead of wood.
Once you have the tools, you can place the blocks first, then the jacks right on top. Then just follow the instructions for the jack and you are done. There are many jack types, from specialty stabilizing ones, to scissor jacks and more. Each one has different methods of operation, so follow the instructions and you will see how easy it is to make your rig more stable.
Stabilizing the trailer is actually not a must, but it is a good idea to do it. If you do not and something breaks or slips, then you could have a minor or even a major disaster on your hands. It also makes being inside the RV much more pleasant, as there will be little to no rocking or instability.
Trailers come in a wide variety of sizes, and the larger ones tend to be much more stable overall, all on their own. The smaller ones are less stable, so if you are using one of those, then you definitely want to get stabilization tools before you start traveling. Thankfully, they are not very big or cumbersome to carry or store.
Before you can stabilize anything, you must park, and that means finding a good spot. If you can find a concrete pad, that would be best, since it will not sink. Campgrounds or RV parks are excellent places to find these kinds of stable pads, and they have water and sewage hookups to boot. However, anyplace that is relatively solid ground can work. Try to avoid muddy areas, as the trailer can sink too easily this way.
The most important tool in your stabilization arsenal is jacks. These are easy to find in any auto parts or big box superstore, and most have them in stock and ready to go. They are also usually very affordable.
Blocks are another way to go. Most people use 2x6 blocks that are anywhere from six to eight inches in length. The length of these blocks, which are usually made of wood, largely depends upon the size of the trailer you are trying to stabilize.
If you really want to go for the utmost in stabilization, think about using both jacks and blocks. They are great for any surface, but you should especially use them if you decide to park in a rainy area or where the ground is soft.
As technology surrounding plastic increases, manufacturers can make plastic blocks that are just as strong and steady as wood ones, but more compact and lightweight. Consider using these instead of wood.
Once you have the tools, you can place the blocks first, then the jacks right on top. Then just follow the instructions for the jack and you are done. There are many jack types, from specialty stabilizing ones, to scissor jacks and more. Each one has different methods of operation, so follow the instructions and you will see how easy it is to make your rig more stable.
About the Author:
When you are searching for information about how to stabilize a parked travel trailer, visit our web pages online today. More details are available at http://www.ksstabilizers.com now.
No comments:
Post a Comment